Features Having re-evaluated the performance of models throughout the Prestige range, Tannoy engineers selected the latest cutting edge components and materials at their disposal to introduce several performance enhancing amendments to the crossover topologies within the �SE� models. To optimise acoustic performance only components of the highest possible standard have been used. Hard-wired crossovers are used throughout the Stirling SE and the routing of each cable has been painstakingly considered to ensure there is no degradation in sound quality. Similarly, the components have been carefully arranged to avoid any coupling effects. In particular, incredible transparency in the mid band has been achieved providing an enhanced true-to-life vocal clarity. Completely redesigned crossovers, incorporating the most up-to-date high quality components, have taken these models to a new level of acoustic excellence. ICW Clarity Caps have been included for high frequency (HF) section of the crossovers, while high quality metalised film capacitors are used in LF sections. The LF crossover also makes use of very low loss laminated iron core inductors. Internal connections from input terminals to crossover, internal crossover wiring and crossover to Dual Concentric� drive unit are made with the exceptional VDH MC CS18 halogen free silver-plated cable. A 5-point terminal panel (bi-wire and ground point) gold plated terminals has been incorporated on the Stirling SE. With the driver chassis grounded via the 5th terminal, and by using appropriate speaker cable, this proven technology, developed on earlier Prestige models, minimises the effects of RF interference resulting in a more transparent midrange.
----------------------------------------------------------------
Specifications
| Stirling SE | |
| PERFORMANCE | |
| Recommended amplifier power | 30 -150 Watts |
| Continuous power handling | 95 Watts RMS |
| Frequency response | 39Hz - 25kHz -6dB |
| Sensitivity | 91dB (2.83 Volts @1 metre) |
| Nominal impedance | 8 Ohms |
| DRIVE UNITS | |
| Dual Concentric� high frequency | 25mm (1.00�) aluminium alloy dome with Tulip Waveguide� |
| Dual Concentric� low frequency | 250mm (10.00") treated paper pulp cone with HE twin roll fabric surround. 42mm (15/8") edge wound voice coil |
| Dispersion | 90 degrees conical |
| CROSSOVER | |
| Frequency | 1.8kHz |
| Type | Bi-wired, hard wired passive, low loss 2nd order compensated LF, 2nd order HF |
| Adjustment | +/- 3dB over 1.8 kHz to 25 kHz shelving |
| CONSTRUCTION | |
| Enclosure type | Distributed Port |
| Volume | 85L (3 cu.ft) |
| Dimensions | 850 x 397 x 368mm (33.50 x 15.50 x 14.50�) |
| Weight | 23kg (50.7 lbs) |
| Finish | Walnut veneer with solid walnut edging and trim detail |
| < Prev | Next > |
|---|
