Specifications
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
It is only through the support of advocates such as yourself that true sound can be promoted...
- Mass Loading: All Totem columns work very well without any type of mass loading. However if stability is an issue or if there is a particular over emphasis in the bass in the room they are used in, then mass loading can be experimented with. Variables such as electronics, wiring and room dynamics play a definite role and therefore the option is there for your experimentation. One may use: clean dry sand,silica sand, dry particulate matter or non-odor kitty litter.
- Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.
| Break in time: | 60 � 80 hours |
| Placement from rear wall: | 1' - 6 feet' |
| Placement distance apart: | 3' - 8' |
| Mass Loading: | 2-10 lbs in each cabinet |
| Frequency Response: | <29 Hz to 21 kHz � 5 dB (with proper placement) |
| Impedance: | 6 ohms |
| Sensitivity: | 88 dB |
| Power: | 120 W max. program |
| Crossover frequency: | 2.5 kHz 1st order compensated |
| Woofer: | 5 1/2" dia. Special extreme long throw. Non-resonant cone and dust cap. Dynamic linear suspension for maximum airflow. Patented magnet system. |
| Tweeter: | 1" alloy dome. Flexible linear suspension. Special low resonance chambered unit |
| Max SPL's: | In average room (4 m x 6 m) 107 dB peak from pair at 2 m |
| Dimensions: | w 6.75 x d 9.5 x h 36" w 170 x d 245 x h 910 mm |
| < Prev | Next > |
|---|
